Updated Oct 17, 2026· 6 min read

Our Top Picks

  1. BORA Wood Rack41-42" H x 72" W x 12.5" D12.1 Pounds
    Check on Amazon
  2. Ultrawall Wall Mount Wood Organizer and Lumber Storage17 x 1 x 15 inches14 pounds
    Check on Amazon
  3. YYR Wood Organizer and Lumber Storage Rack Wall13 x 1.2 x 16.7 inches10.6 Pounds
    Check on Amazon
  4. Olgsibb Lumber Storage Rack Wall MountA-4 Pack13 x 1 x 16.5 inches10 pounds
    Check on Amazon

The scrap metal storage ideas that work best start with sorting: separate bins for each metal type (copper, brass, aluminum, stainless and plain steel), a vertical rack for usable offcuts, and a covered, off-the-ground spot outdoors for bulky steel. Sorted, clean scrap is easier to reuse in projects and usually earns more at a scrap yard than a mixed pile, so the storage system pays for itself in both time and money.

Decide What Is Scrap and What Is Stock

Most garage and shop “scrap” is really two different things, and they need different storage:

BORA Wood Rack, 6-Level Wall Mount Lumber Storage Rack for Wood Storage | Heavy duty wall mounted lumber storage rack for garage organization; 6-level wood rack design workshop organizers

BORA Wood Rack, 6-Level Wall Mount Lumber Storage Rack for Wood Storage | Heavy duty wall mounted lumber storage rack for garage organization; 6-level wood rack design workshop organizers

Chosen because it specifies 6-Level Wall Mount Lumber Storage Rack for Wood Storage.

View on Amazon

Ultrawall Wall Mount Wood Organizer and Lumber Storage Rack with 3-Level | Garage Metal Wood Storage Rack for Indoor & Outdoor Use, Orange 4 Pack

Ultrawall Wall Mount Wood Organizer and Lumber Storage Rack with 3-Level | Garage Metal Wood Storage Rack for Indoor & Outdoor Use, Orange 4 Pack

Chosen because it specifies Garage Metal Wood Storage Rack for Indoor & Outdoor Use and Orange 4 Pack.

View on Amazon

YYR Wood Organizer and Lumber Storage Rack Wall Mount, Heavy Duty Metal Shelf with 6-Level Holds Up 1200 LBS, Indoor & Outdoor Use - Orange

YYR Wood Organizer and Lumber Storage Rack Wall Mount, Heavy Duty Metal Shelf with 6-Level Holds Up 1200 LBS, Indoor & Outdoor Use - Orange

Chosen because it specifies Heavy Duty Metal Shelf with 6-Level Holds Up 1200 LBS and Indoor & Outdoor Use.

View on Amazon

Olgsibb Lumber Storage Rack Wall Mount, Foldable 8-Level Wood Storage Rack | Metal, Removable & Adjustable Arm, Indoor and Outdoor Use, for Garage, Workshop, Basement

Olgsibb Lumber Storage Rack Wall Mount, Foldable 8-Level Wood Storage Rack | Metal, Removable & Adjustable Arm, Indoor and Outdoor Use, for Garage, Workshop, Basement

Chosen because it specifies Foldable 8-Level Wood Storage Rack and Metal.

View on Amazon

  • Usable offcuts: pieces of bar, angle, tube, plate and sheet long enough to use in a future project. These need to be visible and easy to find by size.
  • True scrap for recycling: pieces too small, damaged or mixed to use. These need to be sorted by metal and stored until there is enough for a trip to the yard.

A simple cutoff rule keeps the two from blending: anything shorter than about 6 inches for bar and tube, or smaller than your palm for plate and sheet, goes to scrap unless you have a specific use for it.

Sorting Guide: How to Tell Metals Apart

Metal Quick identification Magnet sticks? Suggested container Relative scrap value
Copper (clean pipe, bare wire) Reddish-orange, darkens to brown No 5-gallon bucket with lid Highest
Insulated copper wire Copper inside plastic jacket No Separate bucket or tote High
Brass (valves, fittings) Yellow-gold, heavy for its size No 5-gallon bucket High
Aluminum (extrusions, sheet, cans) Light weight, silver-gray, soft No Tote or 32-gallon can Moderate
Stainless steel Bright silver, resists rust Usually no or weak Bucket or milk crate Moderate
Steel and cast iron Gray, rusts, heavy Yes, strongly Steel drum, bin or pallet pile Lowest per pound

Keep a strong magnet hanging next to the bins. Anything that sticks firmly is ferrous and goes in the steel bin; anything that does not is worth a closer look, because non-ferrous metals are where the value is. Scrap prices change constantly, so check with your local yard for current grades and how they want material prepared.

Indoor Storage Ideas for a Garage or Shop

Bucket row under a bench

Five-gallon buckets fit under most workbenches, which are usually 34 to 36 inches tall. A row of five takes about 5 feet of floor and covers the main non-ferrous metals. Label each lid and the side of each bucket with large letters. Copper and brass get heavy quickly; a bucket of brass fittings can easily pass 50 pounds, so set a fill line on the inside to keep it liftable.

Vertical offcut rack

For bar, tube and angle offcuts, stand pieces upright in a rack divided by length. A simple version is a wooden frame with three or four bays, or short lengths of 4-inch PVC pipe screwed to a backer board. Group by length: under 2 feet, 2 to 4 feet, and over 4 feet. Upright storage shows every piece at a glance; a horizontal pile always buries the one you need.

Wall-mounted cantilever arms

Longer stock, 4 to 20 feet, sits best on cantilever arms bolted to wall studs or a freestanding cantilever rack. Light-duty arms often carry roughly 100 to 300 pounds each, depending on length and anchoring. Keep the heaviest material on the lowest arms.

Sheet and plate slot rack

Sheet metal and plate are safest stored on edge in a slotted rack with dividers every 2 to 4 inches. Lying flat, sheet scratches and is hard to pull out; leaning against a wall, it can slide and fall. Edges are sharp, so a rack also cuts down on handling.

Rolling bins for the cutting area

A rolling 20 to 32 gallon bin next to the saw or grinder catches small cutoffs as they are made. Empty it into the sorted bins at the end of each session. Use a steel or heavy plastic bin; hot chips from grinding can melt thin plastic.

Outdoor Scrap Storage

Option Approx. capacity Weather protection Typical cost Best for
Pallets with a tarp A 48 x 40 in pallet stack Fair Low, often free pallets Bulky steel, appliance parts
55-gallon steel or plastic drum 55 gal Good with lid $30–$100 Aluminum cans, small steel
Lean-to roof against a shed Depends on build, often 4 x 8 ft Good $150–$500 in materials Long stock and sorted bins
Small resin or metal storage shed Roughly 30–150 cu ft Very good $300–$1,500 Sorted, valuable non-ferrous

Get scrap off the ground; even a pallet keeps it out of standing water and slows rust on steel. Keep valuable copper and brass inside or locked away, since scrap metal theft is common and a visible pile of copper attracts attention. Check local rules as well: many cities and homeowner associations restrict visible outdoor storage of scrap and junk, so a covered or screened area avoids complaints.

What Not to Put in Scrap Bins

  • Batteries of any kind: lead-acid and lithium batteries need separate recycling and can leak or catch fire.
  • Pressurized containers: propane tanks, aerosol cans and refrigerant cylinders need proper handling or disposal routes.
  • Electronics: circuit boards and appliances with electronics often go to e-waste programs rather than metal bins.
  • Oily or fluid-filled parts: drain engine parts and transmissions before storage, and keep them on a drip tray.

Match the Setup to Your Situation

Situation Recommended setup
Hobby welder or fabricator Vertical offcut rack, sheet slot rack, rolling bin at the saw
Plumber or electrician collecting job scrap Lidded bucket row for copper, brass and insulated wire
Homeowner clearing a garage Two bins only: magnetic and non-magnetic, then sort at the yard
Small yard with space outdoors Pallets under a lean-to for steel, locked shed for non-ferrous
Renter or shared garage Lidded totes on a shelf; haul scrap away monthly

Whatever the scale, wear cut-resistant gloves when sorting, keep heavy containers at a height you can lift safely, and empty bins on a regular schedule. A sorted system that stays small is far easier to manage than a big mixed pile that has to be dealt with all at once.

K
KK Home Furnishings Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Scrap Metal Storage Ideas: Sorting Bins, Offcut Racks…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.